When operating heavy machinery, there are practices that can help in reducing your fuel consumption and therefore reduce your operating expenses.

1.     Change air filters regularly

Inspect air filters approximately every 50 hours to ensure maximum operating performance. If air filter becomes clogged with dirt, the engine does not get the air it needs to operate efficiently.

2. Grease fittings properly

By keeping your machine properly lubricated to the manufacturer’s specification, fuel efficiency is increased. The more ease of mobility the components have, the less work the hydraulic system must do and the power needed to perform operations is reduced.

3. Check tire pressure

Check tire air pressure before and after each use. If the tire pressure is low, it will reduce the efficiency of your machine thereby also lowering fuel efficiency.

4. Run engine at lower RPMs

Begin by running at a low rpm during operation, then slowly raise the rpm. This will be the most efficient and avoid accelerating aggressively.

5. Service and repair equipment regularly

Be alert to signs of a mechanical problem and service equipment as required.  Maintain a regular maintenance schedule to ensure optimal operations.

6. Avoid excessive idling

Don’t leave a machine idling. When any machine is not in use, the engine should always be off to avoid burning fuel while not in use.